 |
 |
|
|
|
|
Print Machine Specs
Standard Features
- Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
- 150 Ton Punch Station (1-7/8" in 1")
- Keyed Punch Ram for Safety
- 12" Throat Depth
- Punch Gauging Table with Fence and Scale
- Die Holders: 2", 2-1/2", and 3"
- Punch Nut with Wrench
- Adjustable Swing-Away Stripper
- One Round Punch & Die: Max. Dia. 1-1/4"
- Punch Jog Control
- Two Electric Remote Foot Pedals
- Two Adjustable Electric Stroke Controls with Scale
- Two 2-Stage Hydraulic Pumps
- Two Valves
- Angle Shear Capacity 6" x 6" x 1/2" at 90°
- Rectangle Notcher 3" x 5-3/4" x 1/2"
- Notcher Table with Guides
- 240 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 14", 3/4" x 24")
- Shear Table with Miter Fence
- Tool Table Work Area
- Slug Receptacles
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 Volt /3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with
ANSI B 11-5 Standards - Forklift Accommodations
- One Year Warranty
- Made in USA
Capacities & Specifications
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel | Punching Capacity
| 150 ton
1-1/2" in 1-1/4"
1-7/8" in 1"
2-1/2" in 3/4" | 136 mt
38 in 32 mm
48 in 25 mm
63 in 19 mm | | Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. | | Throat Depth | 12" | 300 mm | Flat Bar Shear
(Sabre Blade - Std)
| 240 ton, 24" Length
1" x 14"
3/4" x 24" | 600 mm
25 x 355 mm
19 x 610 mm | | Angle Shear 90° | 6" x 6" x 1/2" | 150 x 150 x 12 mm | Angle Shear 45°
with Bar Shear | 3" x 3" x 3/8"
4" x 4" x 1/2" | 75 x 75 x 10 mm
100 x 100 x 12 mm | | Brake 12" | 75 ton | 55 mt | | Brake 24" | 55 ton | 40 mt | | Open End Brake | Max. 1/4" x 6" Flat or Angle Iron | 6 mm x 150 mm
| Pipe Notcher Housing Schedule 40 I.D.
| 3/4"
1"
1-1/4"
1-1/2"
2" | 19 mm
25 mm
32 mm
38 mm
50 mm | | 90° V. Notcher | 6" x 6" x 5/16" | 150 x 150 x 8 mm | Rectangle
V.Notch
Notching in Leg of
Channel | 3" x 5-3/4" x 1/2"
3" x 3" x 1/2"
6" to 10" |
75 x 145 x 12 mm
75 x 75 x 12 mm
150 mm to 250 mm | | Channel Shear | 2" to 6" Adj. | 50 mm to 150 mm | Rod Shear
Round Rod
Square Rod |
1/4" to 1-1/4",
9 Cav.
1/4" to 1",
1 Cav. |
6 mm to 32 mm
6 mm to 25 mm | Square Tube Shear
| 1/2" to 2"
12 ga. | 12 to 50 mm
2.75 mm | Picket Tool
| 1/2"
3/4"
1"
16 ga. | 12 mm
19 mm
25 mm
1.6 mm | | Offset Die Holder | Max. 40 ton | Max. 36 mt | | Strokes Per Minute in Light Material | 1/4" Stroke [Punch Station] | 20 spm | | Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 11 spm | | Hydraulics | 3,500/3,000 psi | 241/207 bar | Motors
| 10 hp 3 ph
230/460
208/380/575 | 7.46 kW
| Motors Optional
| 10 hp 1 ph
230v | 7.46 kW
| | Dimensions | W-34"
L-77.25"
H-74.25" | W-119 cm
L-174 cm
H-187 cm | | Weight | 6,400 lbs | 2,910 kg |
|
|
|
|
|
