Circular cold saw

Products > Saws > Cold Saw > SUP-500

Mitering Upcut Saw for Cutting Non-Ferrous Materials

Large capacity precision mitering saw for cutting aluminum, copper, plastic & other nonferrous metals. 20" (500mm) carbide tipped blade.

Watch Video

SUP-500

Select Option

Description
Standard Features
Capacities & Specs

The SUP-500 NF is a large capacity mitering up-cut circular cold saw designed specifically for cutting aluminum, copper, plastic and other nonferrous materials. Featuring a 20" (500 mm), 120 tooth carbide blade, it's capable of producing burr free cuts on round material up to 7" in diameter, square material up to 6" and rectangular cuts up to 12' x 4". The SUP 500 NF saw offers an increased cutting capacity not found in traditional pivot down saws.

Standard features include an adjustable feed rate, mitering capabilities with fixed stops at 22.5°, 45°, 135°, and 157.5°, four pneumatic clamps to secure material being cut, and an integrated debris collection. Safety features include dual hand operation and a safety interlock that will prevent the saw from operating with the hood open.

Upgrade this saw with a measuring system (manual to full-auto feed systems available) for accurate cuts at specific lengths, reducing waste and increasing production efficiency.

Precision miter upcut non-ferrous saw
Miter capabilities with fixed ftops at 22.5 degree, 45 degree, 90 degree, 135 degree & 157.5 degree
Safety hood with safety interlock switch
Blade door with safety interlock switch
Dual palm buttons
Adjustable feed rate on saw head
Two horizontal pneumatic clamps
Two vertical pneumatic clamps
Capable of slotting
Moveable back fence for larger capacity
One gallon coolant
Mist coolant lubrication system
One 500 mm diameter, 120-tooth carbide blade
One blade wrench
Air hose
Chip collection drawer in base and a 4-3/4" chip collection port
Adjustable leveling pads
Meets CE standards
Warranty: Three years on parts
Made in Spain

Maximum Cutting Capacities (NF) (Non-Ferrous & PVC )	Round Square Rectangle	90 Degree 7" 6" 11-3/4" x 5"	45 Degree 7" 4-3/4" 5-3/4" x 4-3/4"
Cutting Speed	3,000 RPM
Motor Rate	5.5 HP
Motor Options (Factory Wired)	Specify: 230/460v, 3 ph
Air Pressure	90 psi
Maximum Diameter Blade	500 mm
Arbor Bore	50 mm
Width	42"	107 cm
Depth	45-3/8"	115 cm
Height (top of hood)	60-1/4"	153 cm
Height (floor to table)	38-5/8"	98 cm
Shipping Weight (may vary)	1,200 lbs.	545 kg

Own It For As Low As

^$365 / month

lease-purchase financing available

REQUEST Pricing

Optional Tooling

This SUP-500, with the options we ordered, was built for our purposes and we couldn't be happier. Our operator is dancing in the aisles. Literally. The auto hood feature is a great convenience and the programmable stop is a heaven sent. It works perfectly with no reduction of the machine's capabilities. We've actually used the mitering capabilities of this machine which we originally thought we wouldn't need. The pneumatic clamps are easy to configure and hold our material firmly for cutting. We also love the ability to attach a vacuum to collect chips and coolant. We have cut things with this saw that we never thought we'd cut. And all of this for about a third the cost of the Behringer saw. Definitely one of the best purchasing decisions we've made in the last 5 or 6 years. This machine has given us many reasons to praise. Thank you all for your role in helping us acquire this marvelous piece of equipment.

Mark Kingston | Boltswitch Inc.

Crystal Lake, IL

Not Sure?

Here are some factors to consider
when selecting an ironworker
that works for you.

We’re Here to Help!